Currently we provide four stock options as Standard Products;

• Cast Gloss Paper Permanent Roll Label + Gloss Varnish 

• Cast Gloss Paper Permanent Roll Label + Matt Laminate 

• Synthetic Gloss Permanent Roll Label + Gloss Varnish 

• Synthetic Gloss Permanent Roll Label + Matt Laminate

Roll Label Standard Product Stock Specifications

Cast Gloss Paper Permanent Roll Label + Gloss Varnish

General-purpose application paper labels with rubber-based hot melt adhesive and all-over gloss UV varnish, supplied on a glassine liner.

Minimum application temperature 0°C
Service temperature -40°C to 70°C
Caliper 84μm

Suitable for applications to a wide variety of surfaces including apolar, slightly rough and curved surfaces. Typically used for wine and premium beverages.

Shelf Life
One year when stored at 22 ± 2°C and 50 ± 5% RH

Cast Gloss Paper Permanent Roll Label + Matt Laminate

General-purpose application paper labels with rubber-based hot melt adhesive and matt laminate, supplied on a glassine liner.

Minimum application temperature 0°C
Service temperature -40°C to 70°C
Caliper 99μm

Suitable for applications to a wide variety of surfaces including apolar, slightly rough and curved surfaces. Typically used for wine and premium beverages.

Shelf Life
One year when stored at 22 ± 2°C and 50 ± 5% RH

Synthetic Gloss Permanent Roll Label + Gloss Varnish

General-purpose application polypropylene film with emulsion acrylic adhesive and all-over gloss UV varnish, supplied on a glassine liner.

Minimum application temperature 5°C
Service temperature -20°C to 80°C
Caliper 65μm

Suitable for labeling of products such as cosmetics, toiletries, luxury articles, promotional labeling, automotive lubricants, food (non-direct), beverage and household chemicals where durability and resistance to moisture or chemicals are required. Due to the fairly rigid nature of polypropylene, care should be taken with the use on non-uniform’ surfaces or where a high level of squeezability is desired.

Shelf Life
To obtain optimal performance, use this product within one year of the date of manufacture, under storage conditions as defined by FINAT (20-25°C; 40-50% RH). Prolonged storage outside these conditions might reduce the shelf life.

Synthetic Gloss Permanent Roll Label + Matt Laminate

General-purpose application paper labels with rubber-based hot melt adhesive and matt laminate, supplied on a glassine liner.

Minimum application temperature 5°C
Service temperature -20°C to 80°C
Caliper 80μm

Suitable for labeling of products such as cosmetics, toiletries, luxury articles, promotional labeling, automotive lubricants, food (non-direct), beverage and household chemicals where durability and resistance to moisture or chemicals are required. Due to the fairly rigid nature of polypropylene, care should be taken with the use on ‘non-uniform’ surfaces or where a high level of squeezability is desired.

Shelf Life
To obtain optimal performance, use this product within one year of the date of manufacture, under storage conditions as defined by FINAT (20-25°C; 40-50% RH). Prolonged storage outside these conditions might reduce the shelf life.

If you are not familiar with roll labels, please review our Ordering Guide.

All Standard Product orders are CMYK HP Indigo digitally printed, die-cut and provided in rolls of 500 on 76mm diameter cores.

For specific product specifications, please contact support@cmykhub.com and request a sample pack.

Artwork Guidelines

Labels follow very similar artwork guidelines to other CMYKhub products, however there is some awareness required if roll direction of your labels is important. Please review our Label Artwork Guidelines.

Leading Edge

The leading edge refers to the way the label dispenses off the roll first when labels are machine applied or used in desktop printers. This ensures that the labels are produced in a format that suits the application and orientation of the label. This combined with the Roll Direction will ensure that the labels suit the application. Example: A Label with the dimensions of 50x150mm is not the same as a label with of 150x50mm, the leading edge will be different, and it changes the way the labels come off the roll.

Roll Direction

These are the available roll directions to order in Hublink. You can only select one of these at a time and only certain roll directions are available to you depending on your artwork orientation. Please review our Label Artwork Guidelines.

Standard Product Sizes

The leading edge on rectangle labels is always the first dimension listed in the finish size of the label.

DRO008 – 100mm Circle

DSQ011 – 100x100mm

DRE014 – 50x100mm

DRE003 – 100x150mm